Where DECA systems earn their keep.
YEC builds hardware for teams that erase and test drives in volume. Each port runs its own script, so one system can handle different jobs side by side.
- 01
IT asset disposition (ITAD)
Erase drives to NIST 800-88 Clear or Purge, or DoD 5220.22-M in 3 or 7 passes, and give each customer a report for every drive: model, serial number, health grade, bad sector count and power-on hours. There are no licenses or per-wipe fees, so the cost per drive falls as your volume grows.
- 02
New drive qualification for data centers
Check SMART data and error logs, then run read and write block tests, random access and butterfly seek tests across a full batch before drives go into service. Every result is saved to a log and a CSV file.
- 03
Reverse logistics and RMA control
Test returned drives and sort them with health grades you define. When a drive fails, the system records the time and the cause. The Test and Repair script finds weak sectors and reallocates them where possible.
- 04
Remanufacturing and quality assurance
Scripted tests run the same way on every unit, and logs and work reports keep the results traceable batch by batch. Scripts stay editable, so new drive types do not mean new hardware.
- 05
SSD life cycle management
The DECA MG3800R takes M.2 NVMe and M.2 SATA drives on all 80 ports, with Secure Erase in enhanced mode and NIST 800-88 Purge for SSDs, plus the health data you need to decide whether a drive goes back into service.