Support

Error Display and Corrective Action

Descriptions of errors during operation and corrective actions are shown below.

SCSI interface (Errors issued by main unit)

Displayed Message Error Description Corrective Action
RESELECTION ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
DISCONNECTED ERR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
MESSAGE OUT ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
COMMAND OUT ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
DATA OUT ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
DATA IN ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
MESSAGE IN ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
STATUS IN ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
PARITY ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
UNDEF MESSAGE IN Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
UNDEF STATUS IN Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
UNDEF PHASE ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
NEGOTIATION ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
REQUEST SENSE ERR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
FAS466 ERROR Displayed when SCSI interface protocol ended abnormally. Check cable connections between the main unit and device.
SCSI I/F ERROR Displayed when SCSI interface error was detected. Check cable connections between the main unit and device.
Or, check HDD configuration and specifications.
SCSI DEVICE ERROR Displayed when HVDSCSI device was detected. Check cable connections between the main unit and device.
Or, check HDD configuration and specifications.
ILLEGAL DT LENGTH Displayed when a device without a 512-byte sector data length was detected. Replace with a device that has a 512-byte sector data length.
STATUS ERROR Displayed when an error caused by the device occurred. Device may be physically damaged.
Replace with a non-defective device.